Grandstream-networks GXW400x Instrukcja Użytkownika Pobierz pdf (Strona 18)

Grandstream Networks, Inc. GXW-400x User Manual Page 18 of 39

Firmware 1.0.0.39 Last Updated: 5/2007

CONFIGURATION GUIDE

ONFIGURING GXW400X VIA VOICE PROMPT

DHCP MODE

Select voice menu option 01 to enable GXW400x to use DHCP.

STATIC

IP MODE

Select voice menu option 01 to enable GXW400x to use STATIC IP mode, then use option 02, 03, 04, 05

to set up IP address, Subnet Mask, Gateway and DNS server respectively.

IRMWARE SERVER IP ADDRESS

Select voice menu option 13 to configure the IP address of the firmware server.

ONFIGURATION SERVER IP ADDRESS

Select voice menu option 14 to configure the IP address of the configuration server.

PGRADE PROTOCOL

Select voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose

between TFTP and HTTP.

FIRMWARE UPGRADE MODE

Select voice menu option 17 to choose firmware upgrade mode among the following three options:

always check, 2) check when pre/suffix changes, and 3) never upgrade

WAN

PORT WEB ACCESS

Select voice menu option 12 to enable WAN Port Wed Access of the device configuration pages.

ONFIGURING GXW400X WITH WEB BROWSER

GXW400x has an embedded Web server that will respond to HTTP GET/POST requests. It also has

embedded HTML pages that allow users to configure the GXW400x through a Web browser such as

Microsoft’s IE and AOL’s Netscape.

ACCESS THE WEB CONFIGURATION MENU

The GXW400x HTML configuration menu can be accessed via LAN or WAN port:

From the LAN port:

1. Directly connect a computer to the LAN port.

2. Open a command window on the computer

3. Type in “ipconfig /release”, the IP address etc. becomes 0.

4. Type in “ipconfig /renew”, the computer gets an IP address in 192.168.2.x segment by default

5. Open a web browser, type in the default gateway IP address. http://192.168.2.1

. You will see the

From the WAN port:

The WAN port HTML configuration option is disabled by default from factory. To access the HTML

configuration menu from the WAN port:

1. Enable the “WAN Port Web Access” option via IVR option 12.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 38 39

Brak uwag

Grandstream-networks GXW400x Instrukcja Użytkownika Strona 18